BOOT CAMP ARCHIVE 2003

  

 

BOOT CAMP 281 (01/07/03)

 

Wireless Networking, part 1

 

For once the hype is true! With wireless networking you can share your broadband Internet connection with any PC in your home or surf the net from your laptop in the back garden and ‘hotspots’ in airport departure lounges and outside coffee shops, so what’s the catch?

 

There isn’t one, wireless networking works, it’s easy to install and configure and it is getting cheaper all the time. You could, for example, network two PCs and a laptop for less than a couple of hundred pounds. Not only will it allow everyone in your home to access the Internet you’ll also be able to swap files between computers and share resources, like printers and scanners. Storing your files on separate computers is also a good way of backing up and protecting valuable or irreplaceable files such as documents, accounts and digital photographs.

 

Over the next few weeks we’ll be looking at how to set up your own home wireless network or ‘WLAN’ (wireless local area network) and share your internet connection but before we get down to the nitty-gritty we’ll quickly run through the technicalities and deal with some more of those pesky acronyms, a few of which are worth remembering when you go shopping for the necessary hardware.

 

There are several wireless networking systems on the market but I strongly advise you to stick with the most popular one, known generically as 802.11b or ‘Wi-Fi’ which allows data transfer speeds of up to 11megabits/second over distances of up to 100 metres (though in practice transfer speeds are typically around half as fast and the range inside a building may only be around 25 metres). It is the closest to an international standard and because it is so popular the parts are relatively cheap and readily available moreover it’s the system you’re most likely to encounter when you are out and about with your wireless-enabled laptop or organiser. In fact there are several different versions of Wi-Fi and you may come across 802.11a and 802.11g types, both are faster (up to 54Mb/sec) and the latter is backwards compatible with 802.11b but for the moment they can be safely ignored them, assuming that you want to keep things simple.

 

So how does it all work? There are various different types of network configuration but the two commonest methods are ‘Ad Hoc’ and ‘Infrastructure’. In an Ad Hoc setup all wireless devices can communicate with one another, which is fine for file sharing files but it makes it harder for individual PCs to connect to common resources, like a printer or the Internet. In an Infrastructure network one PC is designated a ‘Server’ – usually the one that is connected to the Internet -- and all of the other PCs on the network become its ‘Clients’. The Server’s is connected to a device called a Router or Switcher, which acts like a telephone exchange through which all of the PCs in the network can communicate with one another. This type of network is most suitable for a small office or the home and although the setup is a little more involved it is more flexible and lends itself more easily to expansion.

 

In a conventional wired infrastructure network all of the PCs are connected by ‘Ethernet’ cables to the Router. A wireless network is no different except that instead of cables each PC sends communicates with the router by radio signals using small transceiver (transmitter/receiver) modules or Wi-Fi ‘adaptors’. These can either be built into the computer or in the form of an add-on devices that plug into a USB socket, PC Card slot (common on laptops) or an expansion socket on the PC’s motherboard.

 

You may be wondering about security, and how easy it would be for someone to hijack or hack into your network? It is a concern but all Wi-Fi products have a powerful encryption system built in called WEP or Wired Equivalent Privacy. However, whilst the highest level provides a sufficient degree of protection for most non-sensitive applications it’s worth knowing that it is disabled by default on virtually all Wi-Fi products and it is up to you switch it on and use it, but more on that in a later episode.

 

Another reason to enable encryption is a small but growing underground cult known as ‘Warchalking’. Individuals with Wi-Fi equipped laptops roam the streets looking for ‘open’ wireless systems, which they attempt to access. When they find one they leave coded chalk marks on the pavement or wall outside the premises as a sign for others. Most of the time Warchalkers are simply looking for free Internet access and tend not to infiltrate networks, but the potential for hacking is obvious so it’s a good idea to enable the security features on your system. For an insight into Warchalking have a look at: http://www.warchalking.org/

 

As the number of WLANs increases so too does the possibility of  interference though here in the UK and the rest of Europe 13 radio channels have been allocated to 802.11b Wi-Fi systems and it shouldn’t be a problem for most home users, but if you live in or close to a commercial district it’s something else to be aware of.

 

Next week – Wireless networking, part 2

 

JARGON FILTER

 

ETHERNET

Industry standard networking system that allows the transfer of data over cables at speeds up to 100 megabits per second

 

HOTSPOT

Public Wi-Fi access point, users are normally required to pay a fee or subscription before they can log on

 

ROUTER

Device in a network that transfers data between computers

 

 

TIP OF THE WEEK

Your network and every PC connected to it will require a unique name and identity so now might be a good time to think about it; if you don’t Windows will assign default names and possibly make it easy for snoopers to infiltrate your system. Give your network a simple but not too obvious name, based on your name, the street you live in or a family pet for example. In this example we’ll call our network ‘Fido’. Every PC now needs a name based on the network name, i.e. Fido1, Fido2, and so on. Finally, give each PC an identity, so you know what and where it is or who uses it, e.g. ‘officeibm’,  ‘kidsdell’, ‘compaqloft’ etc. It’s a good idea to jot all this down, either on a sheet of paper or create a simple table in Word with enough rows for each PC (plus a couple of spares), and keep it in a safe place.

Search PCTopTips 


Web

PCTopTips

Boot Camp Index

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

 

Top Tips Index

Windows XP

Windows Vista

Internet & Email

Microsoft Word

Folders & Files

Desktop Mouse & Keyboard

Crash Bang Wallop!

Privacy & Security

Imaging Scanning & Printing

Power, Safety & Comfort

Tools & Utilities

Sound Advice

Display & screen

Fun & Games

Windows 95/98/SE/ME

 

 

 

 

 

 Copyright 2006-2009 PCTOPTIPS UK.

All information on this web site is provided as-is without warranty of any kind. Neither PCTOPTIPS nor its employees nor contributors are responsible for any loss, injury, or damage, direct or consequential, resulting from your choosing to use any of the information contained herein.